Do you also love fishing? But don’t go for a fishing ride as you find it pointless to buy an expensive fishing rod just because you want to go fishing three to four times a year. Don’t worry about the cost since we’ve done in-depth research and brought the solution for you. You might be thinking about how to make a fishing rod. But you don’t need to overthink and stick with us till the end to find different ways to make fishing rods.
How to Make A Fishing Rod: Overview
No doubt making a rod is not an easy task. But, in the end, the result you’ll get is worth the effort.
We know that you don’t have much idea how to make a fishing rod in real life. That’s why we write this article so that you can make the best rod with your hands.
Below you’ll learn about:
- How to make a fishing rod out of bamboo and PVC?
- How to make a small fishing rod for kids?
Should You Build Your Own Fishing Rod
It depends upon the situation. If you’ve time and want to spend it to make something useful, you should build your fishing rod. Other than that, you’ve complete control to choose the material of the rod. You can make bamboo or even a PVC rod in the design you prefer. Plus, it’s also a fantastic way to save some bucks.
Pros
- You can make fishing rods the way you like.
- You’ve complete control while choosing the components of the rod.
Cons
- It is difficult for a novice to make a perfect rod.
Components Required
No one can make a perfect rod without the required components. There are some essential things that you should buy before starting the DIY rod project.
Bear in mind that the components you used to construct bamboo rods don’t need to be helpful while building a PVC rod. So be careful and buy the components after reading the list of required materials for that particular rod.
How to Make A Fishing Rod Using Bamboo
Materials Required
- 3 to 4 pieces of Bamboo – Size (1 to 2 inches in diameter, 8 to 10 feet in length)
- Fishing Line
- Hook
- Bobber
- Sinker
- Multi-tool to create the bamboo rod.
Process
Step One – Prepare Bamboo Rod
First of all, choose three to four pieces of bamboo cane in case one part breaks; you can work on the second bamboo cane. Hold the piece of bamboo and cut all of them one by one from the base.
Step Two – Make Bamboo Rod Smooth
Get a sharp knife and cut all the branches, leaves, and nodes. Make sure that the bamboo piece is smooth enough that you will feel comfortable with it.
Note:
Use sandpaper to smooth the body of the bamboo rod.
Step Three – Dry Bamboo Rod
Here comes the time-consuming process of the entire project. After making the piece of bamboo smooth, please put it in a warm area. Don’t think of drying bamboo rods in direct sunlight. At last, patiently wait until the rod color turns tan from green color.
Note:
Drying a bamboo rod is a time-consuming process; you’ve to wait at least three to four weeks to see the result.
Step Four – Attach the Components
Now, it is time to attach components to the bamboo rod. The first thing you’ve to attach is the fishing line. Though you can buy any fishing line you want, we recommend the Dacron line or Monofilament.
After buying, it starts tying the fishing around the body of the rod (start tying above two inches from the handle) and tie off the line or end this procedure with a whip-finish.
Tip:
Don’t tie the fishing line too loose or too tight.
Remember you’ve to leave two feet of fishing line from the tip of the bamboo rod. In the end, attach the hook to this remaining fishing line along with the bobber and sinker. And your bamboo fishing rod is ready.
Pros
- Bamboo rods are durable and solid.
- These rods are super-sensitive rods that are good for anglers.
- They used to be flexible.
Cons
- Quite heavy to use.
How to Make A Fishing Rod Using PVC
Materials Required
- Two PVC pipes but boh with different diameters.
- Binder clips
- Sandpaper
- Fishing Line
- Fishing Reel
- Tools such as (Drill, Saw, Pliers)
- Two threaded connectors (male-female) and (female-female) in 1/2-1/4 size.
Process
Step One – Customize the Length of PVC Rod
Get two PVC pipes of different sizes (one in 1.3 cm diameter and the second in 1.9 cm). Cut them down with a saw according to your desired length.
You can also cut the pipes in a short length and build a rod for your kid. After cutting the pipes, use sandpaper to smoothen the edges of PVC pipes.
Step Two – Use Connectors
Now it’s time to use connectors, hold the slip caps and connector, attach them to the one side of both PVC pipes. These threaded connectors will help you in joining both pipes.
Step Three – Drill Holes and Attach Eyelets
Hold a drill and set the drill bit of 0.2 mm. Drill at least four to five holes or even more on the thicker piece of PVC pipe. The quantity of holes depends upon the length of the pipe. Just make sure that all holes are aligned evenly through the pipe, keeping the corresponding space of 1.3-inch.
Get a plier and remove the black part of the blinder clip. And shape the white part of the binder clip in a circle or loop form. Then hold one leg of the clip, bend it and insert it in the first hole.
Repeat the process and insert the second leg of the clip in the second hole. Insert all the binder clips in holes. That’s how you can make eyelets from cheap binders.
Step Four – Attach the Reel and Connect the Pipes Together
Drill two more holes into the side of the thicker pipe and attach the fishing reel with the help of screws. Here comes the time to use a fishing reel, connect the fishing reel to the rod through eyelets. Attach other components such as hook, sinker, boober at the end of the fishing line.
The last step for you is, hold both PVC from the side where you attach connectors and insert the shorter pipe into the bigger one. And Your PVC rod is ready for fishing.
Pros
- You don’t need a high budget to make this rod.
- It is a good fishing rod.
- You can easily use it, even if you’re a beginner.
Cons
- There are no cons of this method
How to Make A Fishing Rod For Kids
Materials Required
- Stick
- String
- Fishing Line
- Sand Paper
- Hook
Process
Step One – Make a Rod
Get a long stick, cut it according to the length which is suitable for your kid. Remove the leaves, branches from the stick. Use sandpaper and make the edges and body of the stick smooth and safe for the kid.
Step Two – Attach Fishing Line
Attach the fishing line to the base by tying a knot (3 to 4 inches above the starting point). Bind the fishing line throughout the stick (from the bottom to the top of the rod).
In the end, tie a knot at the top of the stick. Just make sure to leave two to three feet of fishing line from the rod’s tip to attach a hook.
Step Three – Attach a Hook
Add a hook to the remaining fishing line. Now a fishing rod that is only made from a stick is ready for your kid to play.
Pros
- It is lightweight as compared to other rods.
- Suitable for playing and also enjoying fishing.
Cons
- It is not durable as it’s made for kids to play and enjoy fishing.
Frequently Asked Questions (FAQs)
How hard is it to build a fishing rod?
Making a fishing rod at home is not as arduous a task as it seems. Even a beginner with basic knowledge of the rod can create it after watching or reading a guide. Sometimes, a DIY project turns out wrong, but only when you don’t follow the guideline properly.
How do you make a homemade fishing rod for kids?
Get a straight and long stick. Tie the fishing line from the base (3 to 4 inches above the bottom) to the top of the stick.
Ensure to leave 2 to 3 inches of fishing line from the tip and attach a hook to the end of the fishing line.
Is it worth building your fishing rod?
Without any doubt, yes, making your fishing rod is worthwhile. After all, you can customize the rod the way you like. Plus, you can also design it according to your fishing style.
How long does it take to build a custom fishing rod?
The time of making a fishing rod depends upon the material you use. For example, if you are constructing a PVC rod, you can make it in one or two days. Bamboo rods take at least three to four weeks because you’ve to dry the bamboo.
What is the best rod blank?
Blank is the body of the fishing rod. It’s a place to attach other components such as guides, reels, etc. Choosing a rod with a perfect blank is essential.
Remember that no one can suggest the best rod blank because there are many things an angler has to consider. However, you can choose the best rod blank for you by following these tips.
- Choose a big blank to catch big fishes and a small blank for small fishes.
- Choose a sensitive blank.
- Ask about the blank material from the seller before buying a rod.
- Select the correct length of blank that suits you and the fishing environment.
Bottom Line
No doubt making a fishing rod and using it successfully is a fantastic experience. However, it’s a time-consuming task. The fruitful result you get in the shape of satisfaction and happiness is worth all your effort. Make sure that you follow all the guidelines precisely. Was this article on “how to make a fishing rod” helpful for you? Let us know in the comment section.
