Before going fishing, it is essential to check all of the necessities which are required for fishing. It is not good to go with a broken rod tip because professional anglers know that placing the fishing gear in its correct position is essential.
In this scenario, you should not get rid of the fishing rod but get rid of the problem. It means you can even repair this little thing too. Everyone is familiar that true enjoyment only comes when you have proper and well-working fishing equipment.
You will learn about some known ways to repair tips and things needed for fishing rod tip repair in the upcoming details. Moreover, only some steps are involved in the entire process, which is straightforward. So you can replace your tip within a few minutes and be ready for a new game.
Fishing Rod Tip Repair: Overview
Many fishing rod tips consist of ceramic inserts which protect the fishing line when it is in action. Ceramic inserts are highly durable, it is true. That’s why it has to bear much wear and tear. So, the fall out of ceramic chips happens rarely; if so, it is because of damage.
But the thing to know is that you could not repair the broken rod tip, but you have to replace it with a new one. In this way, you have to be familiar with the requirements of a fishing rod tip repair kit. As rod tips are different for every model, so the tips are.
There are various rings and tubes; you can select the most suitable for your fishing rod. For the replacement of the fishing rod, you have to follow the simple steps. It is not a time-consuming process and also does not need any professionals to replace it. So, keep in touch and follow the method to replace your fishing rod tip without any hassle.
Ways to Repair Your Fishing Rod
There are different ways through which you can reset your fishing rod in less time. These are simple and do not require any expertise; you can do it yourself. Many professional anglers tend to try these methods, and the result used to be excellent. Here are three budget-friendly ways.
Rod Tip
If the fishing rod breaks the size of one or two inches, generally, it requires a new tip, and you can save it from more damage. The replacement and repairing of rod tips depend on the damage. Fortunately, rod repair kits are available at low prices, including rod tips and glue bottles.
If the damage is more and it is not repairable, you have to remove the entire tip. For this purpose, you need to turn on the flame and heat the metal tip. After that, slide off the tip through needle-nose pliers. Now, get rid of any adhesive and clean it properly.
The next step is to apply the glue well and slightly put a new tip on the rod. Make sure that you place the tip in an exact and straight position. It would be best to put the new rod tip as soon as possible because instant glue dries within a few seconds.
Line Guide
It will go well if you select the guide that closely resembles the previous one, especially in bigger rods, like bait cast and spinning. First of all, pull out the previous guide from the fishing rod and scrap all the supporting threads to secure the guide.
In this way, make a small channel to hold the new guide perfectly. Now put a smear of super repairing glue and place the guide carefully on the channel of the rod. Besides this, some of the professional anglers pass through line guide repairing and use dental floss.
It will indeed work well. You have to wrap the floss on the upper and lower of the guide and put a small blot of glue. After this, make a durable knot and snip off the fishing line near the rod. Again put another drop of glue and dry it before the game.
Hook Keeper
If the fishing rod gets damaged on the hook, you can also repair it by yourself. Also, some fishing rods do not contain hook keepers. Thus, you can make it on your own with the help of the previous rod guide. For this purpose, follow the layout process of rod guide replacement.
On the rod, mounting the hook keeper can be done on the above reel and posterior to the rod’s blank. It is an excellent place to mount, but it creates a minor problem: the fishing line can wrap on the cast. The micro guides are available, which go well; you have to undo the insert.
Now, you can have a low hook keeper profile with increased diameter for the sake of perfectly fitting the hook.
Fix A Broken Fishing Rod Tip
The fixing of a broken fishing rod requires as much as 50 to 60 minutes. But it depends on the speed of the maker. If you experience the situation before, then it will take less time now. After completing the steps, you can use the repaired fishing rod within 4 to 5 days.
Required Material
Anglers can get these things from any nearby hardware store because they are available at any store.
- Sandpaper
- Rod wrap finisher
- Utility Knife
- Epoxy paste
- A dowel rod
- Tinfoil
- Tin snips
- Toothpicks
- Superline
Steps to Fix A Broken Rod Tip
There are simple steps include:
Step 1: Understand the Break
First of all, you need to get the breakpoint and then measure it from the broader point. If it is about eight to nine inches, then get the dowel rod of the same size.
Now, cut the dowel rod using a tin snip. Then, gradually lessen the rod and wrap about 1.5 inches on the bottom of the blank and rest on the top. Put glue or adhesive material on it.
Step 2: Tapering the Dowel Rod
After getting the method, if there is any line or reel on the fishing rod, remove it. With the help of the sprinter, the blank will be in the right place, so clean it.
Now, taper the dowel rod; for this purpose, you can get the help of sandpaper. The use of sandpaper is to fit it perfectly. Ensure that the dowel rod is tightening and fit, but do not bend it forcefully; it can split.
Step 3: Use of Epoxy
You can use any adhesive material to glue the fishing rod as an epoxy. Before applying the glue, make sure that there is no obstruction on the tip of the rod. If so, then first clean it through tweezers.
After this, swipe on the dowel rod on the upper part of the fishing rod. The reason is that the rod will snug fit. It will create a problem if you put the dowel rod in the bottom part. If you do so, then the bottom will become chubby as it moves down toward the rod.
Now, use tin foil and put a drop of epoxy on it. Next, you have to fill the broken rod holes with adhesive substance by the use of toothpicks.
After pouring a big blot of epoxy, pick the dowel rod instantly and dip its above tip into the adhesive. Now, you have to press the rod gently and smoothly for fixing purposes.
The process is similar for both sides, so repeat it accordingly. But keep one thing in mind: you require splinters for the alignment of the rod.
Step 4: Wrapping of Superline
Use the sandpaper and rub it onto the splinters to make it smooth at the point where you have joined your rod. Do this gently and do not apply harsh hands. Properly wipe the area closer to the crack. Wrap braided fishing line as it is highly durable and allows the epoxy to soak well.
Step 5: Flex Coating
Now you can use the flex coating kit for making a mixture; take 25ml of solution from all bottles in a pot. Now, thoroughly mix the mixture and apply it on a braided line you have already used on the repairing rod. For this purpose, you have to hold the rod and rotate it slowly.
Rotate the rod in slow motion for more than 80 minutes to dry the braided line. If you do not rotate the rod, the mixture will turn into a blot on one side; that’s why it is necessary to sit in front of the speedy fan for drying.
Ways to Replace A Tip-top
There are several ways to replace fishing rod tips. These are convenient and allow you to have a great fishing game within a few minutes, so you must follow the steps below.
- First of all, heat the tip-top and remove it carefully
- Once you buy a fishing rod tip repair kit, do the measurement of the tube
- After that, in the tip-top, fill the epoxy or adhesive material
- Now, heat the tip tube again so it will melt the filled epoxy
- Finally, twist and align the tip guide carefully
Best Kits For Fishing Rod Tip Repair
Many fishing rod tips repair parts are available at different price ranges in the market. All of these are cheap with little difference. If you do not want to replace the entire fishing rod just because of a faulty tip, then buy one of the suitable kits and repair the tip. These include:
- Eagle Claw
- Fuji
- Berkley
Frequently Asked Questions (FAQs)
Can you fix the tip of a fishing rod?
It is easy to repair the fishing rod because it will also go as long as a new one. Complete replacement of an old rod with a new one is not a wise idea. The repair method is simple, even if you do not require help from another person.
How do you fix a top ring on a fishing rod?
To do fishing with a damaged ring is not possible because it cannot carry the weight of fish. So it is good to replace it with a new one which is pocket friendly. So, follow the above-explained steps to fix the top ring.
How do you fix a graphite rod tip?
The graphite rods are known as the most expensive ones. They can be repaired or fixed, but the condition is applied. If the rod breaks from the top of the handle, it is impossible to repair it. Otherwise, you can repair it according to the method explained above.
How do I replace the tip on my rod?
You can replace the tip of your rod by heating it and filling it with adhesive material. Then reheat the top of the rod and slope on the new one carefully, and fix it properly.
How do you glue a rod tip?
To glue the rod tip, you have to rotate it continuously for about an hour after pouring the adhesive. It thoroughly fits the tip on the rod and helps you resume your fishing game quickly.
Final Comments
In the above guide, you have learned simple and easy methods of fishing rod tip repair. If you still have any confusion, then reread the blog carefully and follow each step.
Using the methods mentioned above, you can repair your fishing rod tip without any expertise. It requires less time, and you can buy repair kits from any nearby or online store.
